Making a Rain Barrel Part II

Some of you may recall that I tried (and succeeded at) making my very own rain barrel last summer thanks to the Ecology Action Center in Bloomington. It was pretty darn easy, and I promised to share the details of how I made it with you right here.

Only I didn’t.

I’m fresh from getting my rain barrel set up to start catching water for the year, however, so I thought it was time to fill you in the process in case you’re interested in making your own.

Why bother? For starters, in the summer, as much as 40 percent of a homeowner’s water use goes to the yard. And a rain barrel can save you about 1,300 gallons of water during peak summer months. So whether you’re hoping to conserve a precious natural resource or simply save some cash (I’m all for both), installing a rain barrel makes sense.

But enough blabbering on about the benefits. Let’s get to the good stuff, shall we?

[All instructions below are courtesy of the Ecology Action Center. They’re great people. You should donate to them. Also, my apologies for the lack of photos. Conservative Boy thought I was crazy and didn’t tag along to assist me. Sad.]


Here’s what you need:

• One food-grade 55-gallon plastic barrel
• ½-inch female sillcock (this is the spigot)
• Two #15 O-rings (these are little black rubber rings)
• ¾-inch flat washer (we used grade 8)
• ½-inch brass pipe nipple (this is the threaded pipe that passes through the barrel and connects to the spigot/sillcock)
• ½-inch brass lock nut
• downspout adaptor
• ¾-inch pan head screws
• Hacksaw or jigsaw or sabresaw or Sawz-All
• 4-inch hole saw
• 7/8-inch hole saw
• 1¾-inch hole saw
• Drill
  

Ready to run away screaming yet? OK, so it does sound a bit intimidating if you don’t have any tools or skills with this sort of thing (like me!). That’s why you might want to check around and see if there’s a rain barrel making workshop in your area. If not, I am confident you can do this. Really!

Here’s what you do:

1. Use the 4-inch hole saw to cut a hole in the top of the barrel for your downspout.
2. Use a 7/8-inch hole saw to cut a hole 3 inches up from the bottom of the barrel for your spigot/sillcock.
3. Also use the 7/8-inch hole saw to cut a hole about 2 to 3 inches from the top of the barrel. This will be at the narrow part of the barrel and is where you will start to cut off the top of the barrel with your saw.
   
   
   
4. Use the hacksaw or jigsaw or sabresaw to remove the top of the barrel. (Yes, I really did use the power tools myself, although I had a bit of help a few times.)
   
   
   
5. Wipe any residual oil or liquid from the barrel. (We used newspapers to absorb the liquid. It worked well but it can get incredibly messy. So wear old clothes and whatever you do, don’t clean this out inside your house!)
6. Use the 1 ¾-inch hole saw to cut a hole about 2 inches below the open top of the barrel. This will be for the overflow.
7. Screw the pipe nipple into the spigot/sillcock.
8. Place an O-ring on the pipe nipple, as close to the sillcock as possible.
9. Push the pipe nipple through the outside of the barrel to the inside. The spigot/sillcock is now outside, with the pipe nipple inside.
10. Have someone hold the spigot outside while you place an O-ring on the pipe nipple inside the barrel.
11. Place the metal washer over the pipe nipple.
12. Thread the brass lock nut (or the steel conduit locknut) over the pipe nipple. Tighten it by hand as far as possible. Tighten another 1.5 turns with a wrench to secure it.
13. Take the 4-inch plastic disc that you cut out of the top of the barrel and use a saw to cut it in fourths, like a piece of pie. (Speaking of pie, I can’t wait until it’s time for strawberry rhubarb season. But, as usual, I digress.)
14. Screw the pieces to the sides of the barrel near the top, with at least 1 inch protruding above the barrel.
15. Place the lid of the barrel back on the barrel. The little plastic pieces will keep it centered. The lid usually only fits one way; line that up by referring to the hole you drilled near the top of the barrel when you cut off the top.

One last step: When you position your rain barrel where it belongs, you'll likely want to stack some bricks beneath so it is raised off the ground a bit. This makes it easier to get to the spigot when it's time to hook up the hose or fill up your watering can.


And that’s it! Almost. Depending on where you position your rain barrel, overflow may be a concern. I know I don’t want to be responsible for flooding our basement or the neighbors’ yard.

One option for overflow is to place the male connector end of a sump hose, pointing outward, into the overflow hole at the top of the barrel. A trap adaptor will secure it to the inside of the barrel. The sump pump hose will connect to the outside of the barrel.

Another option is to purchase a downspout diverter, like this one from Garden Water Saver. That’s what I did, only our crappy old gutter wasn’t very cooperative and, to be honest, I’m not sure that it’s a very reliable setup. So I may be going back and drilling that overflow hole, then sticking with the original downspout adaptor after all. We’ll see—it's raining today, so this will be the test.


If you’re looking for more step-by-step info on making a rain barrel, watch Sherry & John in action over at This Young House as they build their own. Fun stuff, my friends.

Making a Rain Barrel

Guess what I did Tuesday night?

If you said, "Run a marathon?" you'd be wrong. And if you said, "Entered a pizza eating contest?" you'd be wrong too (although I have won one before, in case you were wondering). But if you took cues from the title of this post and asked: "Did you make a rain barrel?" you would be correct.

I've written about rain barrels quite a few times before (most recently, I posted about rain water harvesting at The Home Know-It-All). And I'd even contemplated doing things the consumerist way and just buying one—you can find all sorts of attractive options from Gardener's Supply Company, and you can even buy rain barrels at Wal-Mart (they have them at the one in L-Town in case you're interested). But I wasn't really keen on spending all that money on one—you're going to end up forking over more than $100 in most cases.

So when I read about rain barrel making workshops hosted by the Ecology Action Center, I jumped at the chance to participate. The best part? For a mere $35, I got all the supplies I needed to build my own rain barrel—and instruction on how to do it too.

Here's a sneak peek at what the finished rain barrel looks like.


It's currently sitting in my garage because I am waiting to ensure I have the proper precautions in place for when it fills up (as I'm pretty sure Conservative Boy will kill me if the overflowing water invades our basement, and I can't imagine the neighbors would appreciate it if it soaks theirs either).

So stay tuned. Soon I will post a step-by-step on the making of said rain barrel in case you want to make your own. And once I get the barrel in place and ready for action, I'll share that with you too.

In the meantime, here are a few quick reasons why you might want to make your own rain barrel:

• In the summer, as much as 40 percent of a homeowner's water use goes to the yard. Who likes high water bills? Not me. So why not use rainwater instead?
  
  
• A rain barrel can save you about 1,300 gallons of water during peak summer months, according to the EPA.
  
  
• All that water that pours off your roof during big rainstorms works its way toward waterways like your local rivers and lakes—and on the way picks up some nasty chemicals and contaminants. So why not stop some of that toxic runoff?

(Oh, and in case some of you are shrieking about how ugly you think this rain barrel is going to be sitting outside our house, rest assured I have that covered. It will be tucked behind some bushes in the backyard so nary a soul will see it. And if I get really creative, maybe I'll even paint some pretty flowers on it like this or grow some real-life flowers around it like this next year.)